Wet Process Heating and Cooling Equipment

5T Series, 2-1/2" (Stainless Steel) Screw Plug Heaters

WATTS	VOLTS	OVERALL LENGTH In./(mm)	PIPE THREAD	NO. OF ELEMENTS	MODEL NUMBER	SHIP WGT. Lbs./(kg)
4500	240 480	12" (305)	2-1/2	3	5T4.5212 5T4.5412	7 (3.5)
6000	240 480	17" (435)	2-1/2	3	5T6217 5T6417	8 (4)
9000	240 480	25" (635)	2-1/2	3	5T9225 5T9425	9 (4.5)
12000	240 480	32" (815)	2-1/2	3	5T12232 5T12432	10 (4.5)
15000	240 480	40" (1020)	2-1/2	3	5T15240 5T15440	12 (5.5)
18000	240 480	48" (1220)	2-1/2	3	5T18248 5T18448	15 (7)
Other sizes available, consult factory.

Product Features and Benefits:

SUPERIOR CHEMICAL RESISTANCE: For use in most alkaline or aqueous plating solutions and rinse tanks. Check solution recommendation chart or with your chemical supplier for proper sheath material selection.

RUGGED CONSTRUCTION: Heavy wall metal sheaths and screwplug available in 316 stainless steel and titanium.

OUTSTANDING PERFORMANCE: Watt densities of 40 watts per square inch (6.2 w/cm²) ensure long service life.

CORROSION RESISTANT HEAD: Vapor tight, flame retardant PVC enclosure.

SAFETY FEATURES:

• Grounded construction.

CERTIFICATIONS: NRTL/C, CSA and CE.

SIZES: 4,500 watts to 18,000 watts (stainless steel).

VOLTAGES: 240 or 480 volts. 208, 380, 415, 600 and other voltages available. (Three phase standard, single phase available on some models.)

OPTIONS AVAILABLE (consult factory):

• Special configurations and lengths.

• Thermowells.

• Explosion resistant enclosures.

• Carbon steel or incoloy elements.

• Lower watt densities for highly viscous solutions.

• Integral thermostats.

• Temperature and level controls sized to match the heater.

DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB).
You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.

•	Special configurations and lengths.
•	Thermowells.
•	Explosion resistant enclosures.
•	Carbon steel or incoloy elements.
•	Lower watt densities for highly viscous solutions.
•	Integral thermostats.
•	Temperature and level controls sized to match the heater.