Wet Process Heating and Cooling Equipment

DRAE Series, EasyPlug^™ Replacement Digital Thermostats
with 8 foot (2.4m) vinyl sleeved sensor

For use with EasyPlug^™ heaters only (order heater separately).

VOLTS	MAX. AMPS	MODEL NUMBER	SENSOR LENGTH	TEMP. RANGE	REPLACEMENT SENSOR P/N	SHIP WGT. Lbs./(kg)
120	15	DRAE15-1	8' (2440 mm)	-30° to 220°F (-34° to 104°C)	DRA-8L	3 (1.5)
240	8	DRAE15-2	8' (2440 mm)	-30° to 220°F (-34° to 104°C)	DRA-8L	3 (1.5)
Longer sensor lengths available, consult factory. 6 foot (1.8m) flexible power cord and plug included.

EasyPlug^™ systems are easy to install!

Mount the control in an appropriate location and plug it in.

Mount the heater in the tank and plug it in.

That's all there is to it.

It's easy with EasyPlug^™ heater systems from Process Technology!

Product Features and Benefits:

IMPROVES PROCESS CONTROL: LCD display. Provides precise temperature control for critical temperature requirements.

TEMPERATURE SENSOR: Vinyl covered 8-foot (2.4m) sensor included standard with the control. Provides extended service in fresh or salt water.

MOISTURE RESISTANT ENCLOSURE: Front panel and sealed tactile switches.

CERTIFICATIONS: UL.

CAPACITIES:

• Single pole, single throw switches rated at 15-amps for 120 volt or 8-amps for 240 volt service.

• Adjustable temperature range from -30°F (-34°C) to 220°F (104°C).

• +/- one degree, single digit accuracy.

• Single phase only.

• 6-foot (1.8m) power cord and plug.

• Plug-in receptacle for the heater.

• Intended for indoor use only.

• EasyPlug^™ replacement temperature controls are intended for use exclusively with EasyPlug^™ heaters.

SAFETY FEATURES:

• Non-volatile memory.

• Sensor short and break protection.

OPTIONS AVAILABLE (consult factory):

• Combination controls available for three phase service and larger heater loads.

• Plastic enclosures for wall mounting.

•	Single pole, single throw switches rated at 15-amps for 120 volt or 8-amps for 240 volt service.
•	Adjustable temperature range from -30°F (-34°C) to 220°F (104°C).
•	+/- one degree, single digit accuracy.
•	Single phase only.
•	6-foot (1.8m) power cord and plug.
•	Plug-in receptacle for the heater.
•	Intended for indoor use only.
•	EasyPlug^™ replacement temperature controls are intended for use exclusively with EasyPlug^™ heaters.

•	Non-volatile memory.
•	Sensor short and break protection.

•	Combination controls available for three phase service and larger heater loads.
•	Plastic enclosures for wall mounting.

Wet Process Heating and Cooling Equipment

DRAE Series, EasyPlug™ Replacement Digital Thermostats with 8 foot (2.4m) vinyl sleeved sensor

DRAE Series, EasyPlug^™ Replacement Digital Thermostats
with 8 foot (2.4m) vinyl sleeved sensor