This is an electric heater and temperature control system.
WATTS |
VOLTS |
HORIZONTAL |
STANDARD |
316L SS |
TITANIUM |
SHIP WGT. |
1000 |
120 |
11 (280) |
24 (610) |
EDRLSA1111-R24S-PLI |
EDRLTA1111-R24S-PLI |
8 (4) |
1800 |
120 |
16 (405) |
24 (610) |
EDRLSA1.8116-R24S-PLI |
EDRLTA1.8116-R24S-PLI |
11 (5) |
2500 |
240 |
21 (535) |
24 (610) |
EDRLSA2.5221-R24S-PLI |
EDRLTA2.5221-R24S-PLI |
13 (6) |
3500 |
240 |
27 (605) |
24 (610) |
EDRLSA3.5227-R24S-PLI |
EDRLTA3.5227-R24S-PLI |
16 (7.5) |
Each system includes: single phase heater with 10' (3m) cord/plug and digital control with cord/plug. Longer vertical lengths and special configurations available, consult factory. Single phase only. Longer cord lengths available, consult factory. |
||||||
EasyPlug™ systems are easy to install!
- Mount the control in an appropriate location and plug it in.
- Mount the heater in the tank and plug it in.
- That's all there is to it.
- It's easy with EasyPlug™ heater systems from Process Technology!
Electric Heater Product Features and Benefits:
RUGGED CONSTRUCTION:
• 1 1/4" diameter elements • 316 stainless steel for fresh water • Titanium for salt water MOISTURE RESISTANT HEAD:
• Vapor tight, flame retardant polypropylene terminal enclosure. • 10 foot (3m) flexible cord standard up to 3,500 watts. • Wire and conduit provided on 5,000 watt and higher heaters. • Electrical plug for easy installation with temperature control (EasyPlug™ heater only) SAFETY FEATURES:
• Grounded construction. • Thermal over-temperature protector built in. Replaceable PI fuse standard. Protects against low water levels that cause unsafe heater operating conditions. • Non-floating construction. CERTIFICATIONS: cUL and CE.
SIZES: 1000-3500 watts.
VOLTAGES:
• 120 volt (1000 watt and 1800 watt only) • 240 volt OPTIONS AVAILABLE (consult factory):
• Longer cord (or wire and conduit) lengths. • Protective guards. • Mounting clips (standard on EasyPlug™ heaters) • Longer vertical lengths. • Resettable thermal protectors (requires additional control components). • Temperature and level controls sized to match heater.
Digital Control Product Features and Benefits:
IMPROVES PROCESS CONTROL: LCD display. Provides precise temperature control for critical temperature requirements.
TEMPERATURE SENSOR: Vinyl covered 8-foot (2.4m) sensor included standard with the control. Provides extended service in fresh or salt water.
MOISTURE RESISTANT ENCLOSURE: Front panel and sealed tactile switches.
CERTIFICATIONS: UL.
CAPACITIES:
• Single pole, single throw switches rated at 15-amps for 120 volt or 8-amps for 240 volt service. • Adjustable temperature range from -30°F (-34°C) to 220°F (104°C). • +/- one degree, single digit accuracy. • Single phase only. • 6-foot (1.8m) power cord and plug. • Plug-in receptacle for the heater. • Intended for indoor use only. • EasyPlug™ replacement temperature controls are intended for use exclusively with EasyPlug™ heaters. SAFETY FEATURES:
• Non-volatile memory. • Sensor short and break protection. OPTIONS AVAILABLE (consult factory):
• Combination controls available for three phase service and larger heater loads. • Plastic enclosures for wall mounting.
[ Home | Search
our Site | Industrial Products | Aquaculture
Products ]
[ High Purity Products | Product Specials | Company Profile ]
[ Trade Shows | What's New | Employment Opportunities ]
[ Troubleshooting Guide | PDF
Files | Contact Us ]
Copyright © 2008 Process Technology
info@process-technology.com