Wet Process Heating and Cooling Equipment

NE Series, Non-indicating Electronic Thermostats

MODEL
NUMBER VOLTS MAX.
AMPS TEMP. RANGE SENSOR
LENGTH
Ft.(m) REPL. SENSOR
P/N SHIP WGT.
Lbs./(kg)

NE20 120/240 20 50-250° F
(10-120°C) 10' (3m) RTD1000 3 (1.5)

NE20H 120/240 20 150-550°F
(66-288°C) 10' (3m) NE20H-10L 3 (1.5)

Specify voltage when ordering (120V or 240V). Longer sensor lengths available, consult factory.
** Thermal Protection Systems

MODEL NUMBER	VOLTS	MAX. AMPS	TEMP. RANGE	SENSOR LENGTH Ft.(m)	REPL. SENSOR P/N	SHIP WGT. Lbs./(kg)
NE20	120/240	20	50-250° F (10-120°C)	10' (3m)	RTD1000	3 (1.5)
NE20H	120/240	20	150-550°F (66-288°C)	10' (3m)	NE20H-10L	3 (1.5)
Specify voltage when ordering (120V or 240V). Longer sensor lengths available, consult factory. Thermal Protection Systems**

Product Features and Benefits:

IMPROVES PROCESS CONTROL: Large, easy to read dial. Provides precise control for consistent plating and etch rates in most aqueous processes.

TEMPERATURE SENSOR: Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Provides extended service in corrosive liquids and can be lengthened with ordinary copper hookup wire.

CORROSION RESISTANT ENCLOSURE: NEMA 1, IP23, gasketed plastic enclosure with stainless steel hardware.

CERTIFICATIONS: cUL.

CAPACITIES:

• Single pole, single throw switch rated at 20 amps for either 120 or 240 volts.

• Adjustable temperature range from 50°F (10°C) to 250°F (120°C).

• +/- 2° F (1°C) accuracy.

• 20° F (-7°C) to 130°F (54°C) ambient temperature range.

• Field selectable power supply: 120 or 208/240 VAC, 50 or 60 Hz.

• Single phase only.

SAFETY FEATURES:

• Pre-wired PI terminal blocks.

• Sensor short and break protection.

OPTIONS AVAILABLE (consult factory):

• 25-foot (7.6m) and 50-foot (15.2m) sensors.

• Combination controls available for three phase service and larger heater loads.

• Pre-wired outlets for plug-in heaters.

• 150°F to 550°F (65° C to 290°C) temperature range.

• Temperature sensors without the fluoropolymer sleeve for high temperature applications.

DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB). You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.

•	Single pole, single throw switch rated at 20 amps for either 120 or 240 volts.
•	Adjustable temperature range from 50°F (10°C) to 250°F (120°C).
•	+/- 2° F (1°C) accuracy.
•	20° F (-7°C) to 130°F (54°C) ambient temperature range.
•	Field selectable power supply: 120 or 208/240 VAC, 50 or 60 Hz.
•	Single phase only.

•	Pre-wired PI terminal blocks.
•	Sensor short and break protection.

•	25-foot (7.6m) and 50-foot (15.2m) sensors.
•	Combination controls available for three phase service and larger heater loads.
•	Pre-wired outlets for plug-in heaters.
•	150°F to 550°F (65° C to 290°C) temperature range.
•	Temperature sensors without the fluoropolymer sleeve for high temperature applications.