 |
Wet Process Heating and Cooling Equipment |
|
||
| MODEL NUMBER |
VOLTS |
MAX. AMPS |
REPL. REPLAY P/N |
REPL. REPLAY P/N LESS TRANS. |
REPL. TRANS. |
REPL. |
SHIP
WGT. Lbs./(kg) |
|---|---|---|---|---|---|---|---|
| NE302 | 240 | 30 | AH30-1 | AH30-2 | HD50 2/1 | RTD1000 | 15 (7) |
| NE304 | 480 | 30 | AH30-1 | HD50 4/1 | RTD1000 | 15 (7) | |
| NE502 | 240 | 50 | AH50-1 | AH50-2 | HD50 2/1 | RTD1000 | 16 (7.5) |
| NE504 | 480 | 50 | AH50-1 | HD50 4/1 | RTD1000 | 16 (7.5) | |
| NE752 | 240 | 75 | AH75-1 | AH75-2 | HD100 2/1 | RTD1000 | 22 (10) |
| NE754 | 480 | 75 | AH75-1 | HD100 4/1 | RTD1000 | 22 (10) | |
| NE902 | 240 | 90 | AH90-1 | AH90-2 | HD100 2/1 | RTD1000 | 24 (11) |
| NE904 | 480 | 90 | AH90-1 | HD100 4/1 | RTD1000 | 24 (11) | |
| NE1202 | 240 | 120 | AH120-1 | AH120-2 | HD150 2/1 | RTD1000 | 26 (12) |
| NE1204 | 480 | 120 | AH120-1 | HD150 4/1 | RTD1000 | 26 (12) | |
| NE1502 | 240 | 150 | AH150-1 | AH150-2 | HD150 2/1 | RTD1000 | 32 (14.5) |
| NE1504 | 480 | 150 | AH150-1 | HD150 4/1 | RTD1000 | 32 (14.5) | |
| Combination
control consists of gasketed plastic enclosure, thermostat, contactor and optional control
transformer. To omit step-down transformer, add "LT" to end of model number. ** Thermal Protection Systems |
|||||||
Product Features and Benefits:
IMPROVES PROCESS CONTROL: Large, easy to read dial. Provides precise temperature control for consistent plating and etch rates in most aqueous processes.
TEMPERATURE SENSOR: Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Provides extended service in corrosive liquids and can be lengthened with ordinary copper hookup wire.
CORROSION RESISTANT ENCLOSURE: NEMA 1, IP23, flame retardant, gasketed plastic enclosure with stainless steel hardware.
CERTIFICATIONS: cUL.
CAPACITIES:
• Large switching capacities from 30 to 150 amps for either 240 or 480 volts (other voltages available). • Adjustable temperature range from 50°F (10°C) to 250°F (120°C). • +/- 2°F (1°C) accuracy. • 20°F (-7°C) to 130°F (54°C) ambient temperature range. • 120, 208, 380, 415, 600 and other voltages available. • Single or three phase. • Control transformer required above 240 volts, and recommended for 208 and 240 volt service. SAFETY FEATURES:
• Pre-wired PI terminal blocks. • Ground connection on wiring panel. • Sensor short and break protection. OPTIONS AVAILABLE (consult factory):
• 25-foot (7.6m) and 50-foot (15.2m) sensors. • Pre-wired outlets for plug-in heaters (some sizes). • Ground fault protection (GFP) circuitry. • PII or PIII thermal protection systems. • Integral liquid level components. • Front panel mounted digital timers. • 150°F to 550°F (65°C to 290°C) temperature range. • Outdoor enclosures. DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB). You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.
[ Home | Search
our Site | Industrial Products | Aquaculture
Products ]
[ High Purity Products | Product Specials | Company Profile ]
[ Trade Shows | What's New | Employment Opportunities ]
[ Troubleshooting Guide | PDF
Files | Contact Us ]
Copyright © 2008 Process Technology
info@process-technology.com
