Wet Process Heating and Cooling Equipment

NR Series, Non-indicating Thermostats

MODEL NUMBER	VOLTS	MAX. AMPS	TEMP. RANGE	SENSOR LENGTH Ft./(m)	REPL. SENSOR P/N	SHIP WGT. Lbs./(kg)
NR25	120/240	25*	30° to 220°F	5' (1.5m)	NR25-5L	3 (1.5)
NR25-12	120/240	25	30° to 220°F	12' (3.7m)	NR25-12L	3 (1.5)
N25H	120/240	25	200° to 550°F	5' (1.5m)	N25H-5L	3 (1.5)
For heating only. * Thermal Protection Systems

Product Features and Benefits:

IMPROVES PROCESS CONTROL: Large, easy to read dial. Provides general control and consistent plating and etch rates in most aqueous processes.

TEMPERATURE SENSOR: Fluoropolymer (FEP) covered 5-foot (1.5m) copper bulb and capillary provided standard with the control. Provides extended service in corrosive liquids. Ethylene glycol filled system.

CORROSION RESISTANT ENCLOSURE: Vapor tight, NEMA 1, IP23, flame retardant gasketed plastic enclosure with stainless steel hardware.

CERTIFICATIONS: cUL.

CAPACITIES:

• Double pole, single throw switches rated at 25 amps for either 120 or 240 volts.

• Adjustable temperature range from 30°F to 220°F.

• +/- 5°F accuracy.

• 30°F (-1°C) to 150°F (65°C) ambient temperature range.

• Single phase only.

SAFETY FEATURES:

• Pre-wired PI terminal blocks.

• Ground connection on thermostat.

OPTIONS AVAILABLE (consult factory):

• 12-foot (3.6m) sensors.

• Combination controls available for three phase service and larger heater loads.

• Pre-wired outlets for plug-in heaters.

• 200°F to 550°F temperature range.

DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB). You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.

•	Double pole, single throw switches rated at 25 amps for either 120 or 240 volts.
•	Adjustable temperature range from 30°F to 220°F.
•	+/- 5°F accuracy.
•	30°F (-1°C) to 150°F (65°C) ambient temperature range.
•	Single phase only.

•	Pre-wired PI terminal blocks.
•	Ground connection on thermostat.

•	12-foot (3.6m) sensors.
•	Combination controls available for three phase service and larger heater loads.
•	Pre-wired outlets for plug-in heaters.
•	200°F to 550°F temperature range.