Wet Process Heating and Cooling Equipment

CX Series, Fluoropolymer (PFA) Helical Heat Exchangers

SURFACE AREA (Sq. ft.)	VERTICAL LENGTH In./(mm)	HEATED LENGTH In./(mm)	CONNECTION SIZE	MODEL NUMBER	SHIP WGT. Lbs./(kg)
.50	11 (280)	3 (75)	1/2" NPT	CX.5-11	2 (1)
1.00	11 (280)	5 (130)	1/2" NPT	CX1-11	2 (1)
1.50	11 (280)	7 (180)	1/2" NPT	CX1.5-11	3 (1.5)
2.00	17 (435)	9.5 (245)	1/2" NPT	CX2-17	3 (1.5)
2.50	23 (585)	12 (305)	1/2" NPT	CX2.5-23	4 (2)
Larger sizes available, consult factory.

Product Features and Benefits:

SUPERIOR CHEMICAL RESISTANCE: For heating or cooling of most aqueous acid and alkaline solutions. Check solution guide or consult with your chemical supplier for proper sheath material selection.

RUGGED CONSTRUCTION:

• Fluoropolymer (PFA) coil.

• PVDF fittings.

• Integral ź-inch thick polypropylene perforated guard helps to protect the coil from damage.

OUTSTANDING PERFORMANCE: Heavy wall, ˝-inch tubing improves circulation and reduces pressure drop.

LEAK FREE OPERATION: Single point connections greatly reduce the potential for leaks and simplify installation.

PRESSURE RATING: PFA (Perfluoroalkoxy resin) tubing rated up to 25 PSI steam service. 10 PSI minimum steam pressure required for operation. Consult factory regarding pressure reduced applications.

NON-CONDUCTIVE: Eliminates stray currents in the tank.

SIZES: .5 ft2 to 2.5 ft2 of exchange area standard.

OPTIONS AVAILABLE (consult factory):

• Special sizes.

• Fluoropolymer (PTFE) guards available for chromic acid and applications greater than 180°F (82°C).

• Special configurations.

• L-shaped configurations for bottom heat applications.

NOTE: Vacuum breakers recommended for fluoropolymer heat exchanger steam heating installations. Please consult factory regarding pressure reduced steam applications.

DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB).
You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.

•	Fluoropolymer (PFA) coil.
•	PVDF fittings.
•	Integral ź-inch thick polypropylene perforated guard helps to protect the coil from damage.

•	Special sizes.
•	Fluoropolymer (PTFE) guards available for chromic acid and applications greater than 180°F (82°C).
•	Special configurations.
•	L-shaped configurations for bottom heat applications.