Wet Process Heating and Cooling Equipment

DLC Series, Digital Thermostats

MODEL NUMBER	VOLTS	MAX. AMPS	TEMP. RANGE	SENSOR LENGTH Ft./(m)	REPL. SENSOR P/N	SHIP WGT. Lbs./(kg)
DLC16-1	120	16	-58-302°F (-50-150° C)	10' (3m)	DLC-10L	2 (1)
DLC16-2	240	16	-58-302°F (-50-150° C)	10' (3m)	DLC-10L	2 (1)
Thermal Protection Systems**

Product Features and Benefits:

IMPROVES PROCESS CONTROL: Large (.56" high), easy to read LED display. Provides precise control for consistent plating and etch rates in most aqueous processes.

TEMPERATURE SENSOR: Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm thermistor sensor included standard with the control. Provides extended service in corrosive liquids and can be lengthened with ordinary copper hookup wire.

CORROSION RESISTANT ENCLOSURE: Vapor tight, IP64, front panel protection, plastic enclosure with sealed tactile switches.

CERTIFICATIONS: UL and CE.

CAPACITIES:

• Single pole, double throw switch rated at 16-amps for either 120 or 240 volts.

• Adjustable temperature range from -58°F (-50°C) to 302°F (150°C).

• +/- 1° full span, single digit accuracy.

• 14°F (-10°C) to 158°F (70°C) ambient temperature range.

• 120 or 240 volt power supply: 50 or 60 Hz.

• Single phase only.

SAFETY FEATURES:

• Non-volatile memory.

• Programmable high alarm shutdown.

• Sensor short and break protection.

• Programmable high setpoint limit.

• Secuirty code restricted menu.

OPTIONS AVAILABLE (consult factory):

• Combination controls available for three phase service and larger heater loads.

• Direct acting output for cooling applications.

• Centigrade readout (must specify).

• Adaptor panels for control retrofits.

• Plastic enclosures for wall mounting.

DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB).
DOWNLOAD .PDF FILE OF DLC INSTRUCTION MANUAL (197 KB).
You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.

•	Single pole, double throw switch rated at 16-amps for either 120 or 240 volts.
•	Adjustable temperature range from -58°F (-50°C) to 302°F (150°C).
•	+/- 1° full span, single digit accuracy.
•	14°F (-10°C) to 158°F (70°C) ambient temperature range.
•	120 or 240 volt power supply: 50 or 60 Hz.
•	Single phase only.

•	Non-volatile memory.
•	Programmable high alarm shutdown.
•	Sensor short and break protection.
•	Programmable high setpoint limit.
•	Secuirty code restricted menu.

•	Combination controls available for three phase service and larger heater loads.
•	Direct acting output for cooling applications.
•	Centigrade readout (must specify).
•	Adaptor panels for control retrofits.
•	Plastic enclosures for wall mounting.