Process Technology

Wet Process Heating and Cooling Equipment

FLX Series, 3" 150 Lb. Style Fluoropolymer (PTFE Flanged) Heaters

WATTS

VOLTS

NO. OF
ELEMENTS

 LENGTH
In./(mm)

MODEL
NUMBER

SHIP WGT.
Lbs./(kg)
1000

240

 1 11
(280)		 3FLX1211-** 20
(9)
2000

240
480

 1 16
(405)		 3FLX2216-**
3FLX2416-**		 23
(11)
3000

240
480

 1 21
(535)		 3FLX3221-**
3FLX3421-**		 26
(12)
4000 240
480		 1 28
(710)		 3FLX4228-**
3FLX4428-**		 29
(13.5)
5000 240
480		 1 32
(815)		 3FLX5232-**
3FLX5432-**		 32
(15)
6000 240
480		 1 35
(890)		 3FLX6235-**
3FLX6435-**		 35
(16)

6" 150 lb. flanged heaters available (6FLX series), consult factory. Heater rated up to 50 PSI service.
**Thermal Overload Protection

Product Features and Benefits:

SUPERIOR CHEMICAL RESISTANCE: Inert to most aqueous acid, anodizing and plating solutions.  Check solution recommendation chart or with your chemical supplier for proper sheath material selection.

RUGGED CONSTRUCTION: Heavy wall fluoropolymer (PTFE) covered stainless steel sheath reduces permeation and eliminates the need for gas purge systems.   Guaranteed 100% pinhold free.

• Rated for up to 50 PSI service.
• Vapor tight metal head.

LONG LASTING PERFORMANCE: Low watt densities of 10 watts per square inch (1.5 w/cm2) ensure long service life.

SAFETY FEATURES:

• Grounded internal metal heating element.
• Thermal protection built in.  Replaceable PT-I device standard for solutions up to 180°F (82°C).

CERTIFICATIONS: CE.

SIZES: 1,000 watts to 6,000 watts.

VOLTAGES: 240 or 480 volts.  120, 208, 380, 415, 600 and other voltages available.  Single phase only.

OPTIONS AVAILABLE (consult factory):

• Resettable thermal protectors:
•  PT-II: for solutions up to 190°F (88°C).
•  PT-III type-J thermocouple for solutions from 190°F (88°C) to 210°F (99°C).
•  PIII type-J thermocouple for solutions from 210°F (99°C) to 250°F (121°C).
• Special configurations and lengths.
• Additional thermowells.
• Integral thermostats.
• Lower watt densities for highly viscous solutions.
• Temperature and level controls sized to match the heater.

NOTE: Gasket and bolts not provided.  Intended for horizontal installation only.

DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB).
You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.

acrobat.gif (1692 bytes)

[ Home | Search our Site | Industrial Products | Aquaculture Products ]
[ High Purity Products | Product Specials | Company Profile ]
[ Trade Shows | What's New | Employment Opportunities ]
[ Troubleshooting Guide | PDF Files | Contact Us ]

Copyright © 2008 Process Technology
info@process-technology.com