Wet Process Heating and Cooling Equipment

Metal Helical Coils

Product Features and Benefits:

SUPERIOR CHEMICAL RESISTANCE: Wide variety of materials available for use in heating or cooling applications for alkaline solutions, acid solutions, and rinse tanks. Check solution guide or consult with your chemical supplier for proper sheath material.

RUGGED CONSTRUCTION: Custom designed to your specifications. Heavy wall, 18-gauge tubing available in steel, 316 stainless steel, and titanium.

LEAK FREE OPERATION: Single point connections reduce the potential for leaks and simplify installation.

HIGH PRESSURE RATING: 100 PSI working pressure (steam or water).

WIDE RANGE OF SIZES:

• Helical sizes: From 3ź-inch to 10-foot diameter available based on tube diameter and wall thickness.

• Tubing sizes: 3/8-inch diameter through 1ź-inch diameter.

• Wall thickness: .035 through .065 inches.

OPTIONS AVAILABLE (consult factory):

• Mounting hangers.

• Multi-layer coils.

• Heavier gauge tubing.

• Zirconium, Hastelloy CŽ, low carbon stainless, and other alloys available.

• Fluoropolymer coatings for corrosion protection at solution/atmosphere interface.

• Non-conductive isolators.

• L-shaped configurations for bottom heating applications.

• Higher pressure ratings (consult factory).

Hastelloy CŽ is a registered trademark of Haynes International, Inc.

DOWNLOAD THE INFORMATION SHEET (including dimensional diagram) IN .PDF FORMAT (approximately 100-150KB).
You will need the Adobe Acrobat program to view the information sheet. If you do not have Adobe Acrobat and would like to download it for free, press the button below.

•	Helical sizes: From 3ź-inch to 10-foot diameter available based on tube diameter and wall thickness.
•	Tubing sizes: 3/8-inch diameter through 1ź-inch diameter.
•	Wall thickness: .035 through .065 inches.

•	Mounting hangers.
•	Multi-layer coils.
•	Heavier gauge tubing.
•	Zirconium, Hastelloy CŽ, low carbon stainless, and other alloys available.
•	Fluoropolymer coatings for corrosion protection at solution/atmosphere interface.
•	Non-conductive isolators.
•	L-shaped configurations for bottom heating applications.
•	Higher pressure ratings (consult factory).