 |
Wet Process Heating and Cooling Equipment |
|
||
Searching for the safest and most reliable water heater on the market? Look no further than the TytanTM Water Heater by Process Technology:
Installation is fast and easy, and the TytanTM requires virtually no maintenance
Ultra-fast heatup and superior temperature stability, regardless of application
Titanium elements maximize cleanliness and eliminate ionic contamination
Compact, self-contained heater and control package
Available in sizes up to 144kW, wall-mounted up to 72kW
Product Features and Benefits:
Outstanding Temperature Responsiveness and Stability: Excellent temperature accuracy over a wide flow range can substantially improve process consistency.
SPECIFICATIONS |
|
| SIZES: | 12,000 watts to 144,000 watts |
| VOLTAGES: | 208 volt to 480 volt, three phase (single phase available). Consult factory for specific wattage/voltage combinations available |
| TEMPERATURE CONTROL: | PID microprocessor based digital thermostat |
| TEMPERATURE LIMIT: | 194° F (90° C), depending on operating conditions |
| TEMPERATURE ACCURACY: | + / - 1° F, depending on operating conditions |
| PRESSURE RATING: | 100 PSIG (operating) |
| EFFICIENCY: | > 99% |
| WETTED SURFACES: | All titanium standard |
| INLET/OUTLET: | 1" MNPT through 72 kW |
| 2" MNPT 96 kW and higher | |
| STANDARD SAFETY FEATURES: | • Grounded construction |
| • EMO emergency stop button | |
| • Fluid overtemperature detection (J type thermocouple) | |
| • Element overtemperature detection (bi-metallic snap switches) | |
| • Control fusing (primary and secondary) | |
| • Surge/transient protection | |
| • FM approved overtemperature limit controller | |
| HOUSING: | NEMA 1 rated, powder coated metal enclosure |
| DIMENSIONS: | • 12-48 kW: 28.5"
(75 cm) W x 13.5" (34 cm) D x 36.0" (91 cm) H |
| • 72 kW: 37.5" (95 cm) W x 13.5" (34 cm) D x 36.0" (91 cm) H |
|
| • 96-144 kW: 28.0" (71 cm) W x 17.0" (43 cm) D x 66.9" (170 cm) H |
|
| STANDARD CERTIFICATIONS: | UL, cUL |
| OPTIONS: | • CE compliance |
| • S3 compliance | |
| • PLC control | |
| • Remote interface | |
| • Ground fault protection (GFP) | |
| • Disconnect and circuit breaker | |
| • Stainless steel elements and wetted parts | |
| • Flanged/sanitary fluid connections | |
| • RS remote communications | |
| SIZING |
| To determine
wattage required, use the following equation: |
| GPM X TEMP
RISE (°F) X 0.147 = kW REQUIRED LPM X TEMP RISE (°C) X
.07 = |
| Where GPM is
gallons per minute of flow desired, temperature rise is expressed in degrees F. Round results up to select unit. |
| Example:
2.5 GPM x 95°F x 0.147 = 35 kW (Use 36 kW) |
| CONSULT
OUR FACTORY FOR DETAILED SIZING INFORMATION AND APPLICATION ASSISTANCE. |
FLOW |
TEMPERATURE RISE (DIFFERENTIAL) degrees C/degrees F | ||||||||
| 7/13 | 15/27 | 22/40 | 36/65 | 45/81 | 52/94 | 55/100 | 65/117 | 75/135 | |
| 3.8/1 | TY12 |
TY12 | TY12 | TY12 | TY12 | TY18 | TY18 | TY18 | TY24 |
| 7.6/2 | TY12 | TY12 |
TY12 | TY24 | TY24 | TY48 | TY48 | TY48 | TY48 |
| 11.4/3 | TY12 | TY12 | TY18 | TY48 | TY48 | TY48 | TY48 | TY72 | TY72 |
| 15.1/4 | TY12 | TY18 | TY24 | TY48 | TY48 | TY72 | TY72 | TY72 | TY96 |
| 18.9/5 | TY12 | TY24 | TY48 | TY48 | TY72 | TY72 | TY72 | TY96 | TY120 |
| 22.7/6 | TY12 | TY24 | TY48 | TY72 | TY72 | TY96 | TY96 | TY120 | TY120 |
| 26.5/7 | TY18 | TY48 | TY48 | TY72 | TY96 | TY120 | TY120 | TY120 | TY144 |
| 30.3/8 | TY18 | TY48 | TY48 | TY96 | TY96 | TY120 | TY120 | TY144 | * |
| 34.1/9 | TY18 | TY48 | TY72 | TY96 | TY120 | TY144 | TY144 | * | * |
| 37.8/10 | TY24 | TY48 | TY72 | TY96 | TY120 | TY144 | TY144 | * | * |
| 41.6/11 | TY24 | TY48 | TY72 | TY120 | TY144 | * | * | * | * |
| 45.4/12 | TY48 | TY72 | TY96 | TY144 | * | * | * | * | * |
* consult factory |
|||||||||
Read about the ADVANTAGES OF USING HOT DI WATER
• DOWNLOAD THE TYTAN BROCHURE IN .PDF FORMAT (393 KB)
• DOWNLOAD THE INLINE WATER HEATER SPECIFICATION SHEET IN .PDF FORMAT (162 KB)
You will need the Adobe Acrobat program to view the information sheets. If you do not have Adobe Acrobat and would like to download it for free, press the button below.
For more information on this, or any other Process Technology product, please contact our offices (toll free within the United States or Canada) for the distributor nearest you, or visit our contact page.
U.S./Canada: 800-621-1998
Worldwide: 440-974-1300
[ Home | Search our Site | Industrial Products | Aquaculture Products ]
[ High Purity Products | Product Specials | Company Profile ]
[ Trade Shows | What's New | Employment Opportunities ]
[ Troubleshooting Guide | PDF Files | Contact Us ]Copyright ©2008 Process Technology
info@process-technology.com
